Paver Patio Cost Calculator

A 16 × 16 ft patio of concrete pavers on a 6-inch stone base costs about $4,378 to $5,740 installed, or $1,874 to $2,343 in materials if you lay it yourself. Clay brick, natural stone and porcelain cost more.

Free · No sign-up · Last reviewed

Quick start:

Your project size

(feet)
feet
(feet)
feet

Estimated Paver Project Turnkey Cost

$7,588 Turnkey Hardscape Quote (384 sq ft)

Complete Material Bill

422 sq ft Pavers + 10 Tons Base + 1.7 Tons Bedding Sand

Want a real price for this paver patio co t calculator project?

Get up to 3 free quotes from local contractors. No obligation. Your numbers are included.

Materials list

MaterialQuantityUnitNotes
Interlocking Pavers (CONCRETE)422Sq FtIncludes 10% cutting and soldier course waste
Crushed Stone Base (#411 / #57)10Tons6" compacted base layer (ICPI standard)
ASTM C33 Washed Concrete Bedding Sand1.7TonsExactly 1-inch uniform uncompacted bedding layer
Commercial Polymeric Joint Sand650-lb BagsLocks joints, inhibits weed growth and insect tunneling
Snap-Edge Paver Restraint & 10" Steel Spikes84Linear FeetAnchors perimeter edge to prevent lateral paver drift

Estimated cost: DIY vs. contractor

National Average
DIY Raw Materials Only
$2,750 – $3,438

Cost of raw lumber, concrete, shingles, wire, or stone without equipment rentals or labor.

Hired contractor
$6,566 – $8,609

Full installation: permits, site prep, skilled trade labor, equipment, and structural warranty.

Estimated Sweat Equity
~$4,494

Average trade labor savings if executed as a skilled DIY homeowner project.

ICPI Interlocking Concrete Pavement System Model

Rendering formula...

ICPI Hardscape Job Costing for 24' × 16' (384 sq ft)

  1. Net Surface Footprint = 24 ft × 16 ft = 384 sq ft.
  2. Gross Paver Order (10% waste) = 422 sq ft.
  3. Crushed Stone Base (6"): 10 tons @ $38/ton.
  4. Bedding Sand (1"): 1.7 tons @ $45/ton.
  5. Turnkey ICPI contractor installation rate: $17.10 to $22.42/sq ft in National Average.
Tip: Do not use limestone screenings or stone dust for bedding sand; ASTM C33 concrete sand is strictly required.

Quick Reference Sizing & Coverage Table

Standard commercial specifications and pre-calculated project benchmarks.

ProjectArea & BaseDIY MaterialsInstalled CostBase Stone
12 × 12 ft, concrete144 sq ft, 6" base$1,072 – $1,340$2,462 – $3,2284 Tons
16 × 16 ft, concrete256 sq ft, 6" base$1,874 – $2,343$4,378 – $5,7407 Tons
24 × 16 ft, concrete384 sq ft, 6" base$2,750 – $3,438$6,566 – $8,60910 Tons
16 × 16 ft, stone256 sq ft, 6" base$3,707 – $4,634$5,875 – $7,7037 Tons
40 × 20 ft, concrete800 sq ft, 10" base$6,148 – $7,685$13,680 – $17,93636 Tons
Interlocking Concrete Pavement Institute (ICPI) Tech Spec 2

ICPI Tech Spec 2 Interlocking Pavement Construction

Requires minimum 4-inch compacted aggregate base for pedestrian patios (6 to 8 inches in freeze-thaw climates) and 10 to 12 inches for vehicular driveways. Bedding sand must be ASTM C33 concrete sand maintained at 1-inch uniform thickness.

How to use the paver cost calculator

  1. Enter the length and width of the patio, walk or driveway in feet.
  2. Pick the paver type.
  3. Pick the base depth. The result shows the installed price, pavers with waste, base stone, bedding sand, joint sand and edging.

How much does a paver patio cost?

Our calculator prices a 16 × 16 ft patio (256 sq ft) on a 6-inch base as:

PaverInstalledPer sq ft installedDIY materials
Concrete pavers$4,378 – $5,740$17.10 – $22.42$1,874 – $2,343
Clay brick$4,838 – $6,344$18.90 – $24.78$2,438 – $3,048
Natural stone$5,875 – $7,703$22.95 – $30.09$3,707 – $4,634
Porcelain$6,451 – $8,458$25.20 – $33.04$4,412 – $5,515

Paver patio cost by size

For concrete pavers:

ProjectAreaBaseInstalled
Walkway, 40 × 4 ft (clay brick)160 sq ft4"$3,024 – $3,965
Patio, 16 × 16 ft256 sq ft6"$4,378 – $5,740
Patio, 24 × 16 ft384 sq ft6"$6,566 – $8,609
Driveway, 40 × 20 ft800 sq ft10"$13,680 – $17,936

What materials does a paver patio need?

For the 16 × 16 ft patio, our calculator lists 282 sq ft of pavers (10% extra for cuts), 7 tons of crushed stone base, 1.1 tons of bedding sand, 4 bags of polymeric joint sand and 68 ft of edge restraint. The bedding layer should be coarse concrete sand; our guide on bedding sand for pavers explains why.

Frequently asked questions

Are pavers cheaper than a concrete patio?

Usually not upfront. A plain poured concrete patio typically costs less per square foot than pavers. Pavers cost more to install but individual pieces can be lifted and replaced if they settle or crack.

How much area does a pallet of pavers cover?

It depends on the paver's size and thickness, so check the coverage on the supplier's pallet label. Order the square footage the calculator gives, which already includes 10% for cuts.

Why does a paver driveway need a deeper base?

Cars put far more load on the surface than foot traffic. Our calculator uses 10 inches of base for a driveway against 6 inches for a patio, which is why the driveway above needs 36 tons of stone.

Sources and review

Prices and quantities come from the calculator above. Last reviewed . How our calculators work.