About SpanSizer
SpanSizer is an independent website that builds free construction calculators and cost guides for homeowners and contractors in the United States. You type in the size of the job, and the calculator tells you how much material to order and roughly what the work should cost.
Last updated
Who we are
SpanSizer is a small, independently owned site. It is not run by a manufacturer, a supplier or a contractor network, and nobody pays to change what a calculator recommends.
We are not a licensed engineering firm, and the calculators are planning tools, not stamped designs. For anything structural, electrical or load-bearing, have a licensed professional and your local building department confirm the numbers before you build.
How our calculators work
Every calculator starts from plain geometry: area, volume, length or count. It then converts that figure into the unit you actually buy, such as cubic yards of concrete, tons of gravel, bundles of shingles or boxes of flooring.
- Waste and compaction. Material calculators add an allowance for cuts, spillage, uneven ground and compaction, because a real job always needs more than the bare measurement.
- Unit conversions. Densities and coverage rates, such as pounds per cubic yard of gravel, come from published supplier and manufacturer figures.
- Formulas on the page. Each calculator shows the formula it uses and a worked example, so you can check the result by hand.
Where a calculator touches a building-code topic, such as wire size or footing depth, it follows the published model code. Your city or county may have adopted a different edition or added its own rules, and the local rule always wins.
Where our cost numbers come from
Cost figures start from a national price range for materials and labor. City pages adjust that range with a local labor index, which is why the same driveway costs more in San Francisco than in Tulsa.
Our cost guides list their sources and the date they were last reviewed at the bottom of the page. Prices are ranges, not quotes. The only way to get a firm price is to have a contractor look at your site.
How we keep it accurate
Pages carry a review date, and we update prices when the underlying data changes. If we get something wrong, we fix the page and change its review date.
Found an error in a formula or a price? Tell us and we will check it. Read our methodology, our editorial policy and the corrections log.
How SpanSizer makes money
The calculators are free. We earn money from advertising on the site, and from contractors or partner networks when you choose to request quotes through one of our forms. You never have to request a quote to use a calculator, and requesting one does not change the numbers you see.