Crushed Limestone Calculator

A 50 × 10 ft driveway with 4 inches of crushed limestone takes about 9.9 tons, which is one tandem truckload. That uses 1.4 tons per cubic yard and adds 15% so the stone is still 4 inches deep after it is rolled.

Free · No sign-up · Last reviewed

Quick start:

Your project size

(ft)
ft
(ft)
ft

Total Crushed Limestone Required

14.3 Tons Compacted (8.9 yd³ loose)

Truckloads & Base Dimensions

1 Tandem Loads (15 Tons/load) | 720 sq ft at 4" depth

Want a real price for this cru hed lime tone calculator project?

Get up to 3 free quotes from local contractors. No obligation. Your numbers are included.

Materials list

MaterialQuantityUnitNotes
Crushed Limestone Base Aggregate (#411 or #57)14.3TonsIncludes 15% mechanical roller compaction allowance
Woven Geotextile Driveway Underlayment Fabric793Square FeetPrevents stone from migrating into soft native subsoil
Tandem Dump Truck Delivery Dispatches1LoadsStandard local quarry tri-axle delivery

Estimated cost: DIY vs. contractor

National Average
DIY Raw Materials Only
$661 – $800

Cost of raw lumber, concrete, shingles, wire, or stone without equipment rentals or labor.

Hired contractor
$2,016 – $3,168

Full installation: permits, site prep, skilled trade labor, equipment, and structural warranty.

Estimated Sweat Equity
~$1,862

Average trade labor savings if executed as a skilled DIY homeowner project.

Aggregate Volume, Bulk Density & Compaction Formula

Rendering formula...

Aggregate Math for 60' Long × 12' Wide Driveway at 4" Depth

  1. Surface Area = 60 ft × 12 ft = 720 sq ft.
  2. Loose Volume in Yards = (720 sq ft × 0.3333333333333333 ft) ÷ 27 = 8.89 cubic yards.
  3. Stone Density = 1.4 tons per loose cubic yard.
  4. Compacted Tonnage = 8.89 yd³ × 1.4 tons/yd³ × 1.15 compaction = 14.3 tons.
  5. Dispatch Logistics: 14.3 tons ÷ 15 tons per tri-axle dump truck = 1 truckloads.
Tip: In National Average, install geotextile fabric beneath your limestone base. Without fabric, up to 30% of your stone will sink into wet soil within 2 seasons.

Quick Reference Sizing & Coverage Table

Standard commercial specifications and pre-calculated project benchmarks.

Driveway SizeDepthCubic YardsCompacted Tons RequiredMaterial + Delivery Cost
40' × 10' (Single Car)4 Inches4.94 yd³8.0 Tons$420 – $650
60' × 12' (Standard)4 Inches8.89 yd³14.3 Tons$750 – $1,150
60' × 20' (Double Wide)4 Inches14.81 yd³23.8 Tons$1,200 – $1,800
150' × 12' (Rural Lane)6 Inches33.33 yd³57.5 Tons (4 Loads)$2,800 – $4,200
AASHTO M147 / ASTM D2940 Graded Aggregate Base

AASHTO M147 Soil-Aggregate Mixture Standards

Driveway base gravel must meet gradation standards with sufficient fines to interlock when vibrated. A geotextile stabilization fabric (Class 1 woven) must be laid over soft clay subgrades prior to gravel spreading to prevent aggregate sinking.

How to use the crushed limestone calculator

  1. Enter the length and width of the driveway or pad in feet.
  2. Pick the finished depth in inches and the stone weight per cubic yard your quarry quotes.
  3. Choose the compaction allowance, 15% or 20%, and read the tons, truckloads and fabric.

How many tons of crushed limestone do I need?

Work out the loose volume (length × width × depth in feet ÷ 27 for cubic yards), multiply by the weight of the stone per cubic yard, and add an allowance for compaction. Crushed stone packs down when it is rolled, so you order more than the finished depth shows.

Cubic yards = Length × Width × (Depth in ÷ 12) ÷ 27
Tons = Cubic yards × Tons per yard × Compaction factor

For 50 × 10 ft at 4 inches with 1.4 tons per yard and 15% compaction: 500 sq ft × 0.333 ÷ 27 = 6.17 cubic yards, × 1.4 × 1.15 = 9.9 tons.

JobSizeDepthStone weightCompactionTonsTruckloads
Single-car driveway50 × 10 ft4 in1.4 t/yd³15%9.91
Double-car driveway60 × 20 ft4 in1.5 t/yd³15%25.62
Long country drive200 × 12 ft6 in1.5 t/yd³20%80.06

How much does a cubic yard of crushed limestone weigh?

The calculator offers 1.4, 1.45 and 1.5 tons per cubic yard. The real weight depends on the stone grade, how much fine dust it has and how wet it is, so ask your quarry or yard what its product weighs. A small difference matters on a long drive: for the 60 × 20 ft example the difference between 1.4 and 1.5 is about 1.9 tons.

How many truckloads is that?

The calculator counts a tandem dump truck at 15 tons. A load over 15 tons dispatches a second truck, so 25.6 tons is 2 loads, and 80 tons is 6. Delivery fees are per load, so check whether your quarry can send one slightly bigger truck.

Frequently asked questions

How deep should crushed limestone be on a driveway?

Four inches is a common depth for a driveway over firm ground, and the calculator offers 2, 4, 6 and 8 inches. Use 6 inches or more over soft soil or for heavy vehicles. Woven fabric under the stone, 550 square feet for the 50 × 10 ft example, keeps the stone from sinking into soft ground.

How much does a crushed limestone driveway cost?

For the 50 × 10 ft example the calculator shows about $485 to $587 for materials and delivery if you spread it yourself, and $1,400 to $2,200 with a contractor, at national averages. Delivery distance moves the price a lot.

Is limestone the same as gravel?

They are different stones with similar uses. Crushed limestone packs tight and drives well. Our gravel calculator covers the other common driveway stones, and the aggregate calculator covers base layers.

Sources and review

Prices and quantities come from the calculator above. Last reviewed . How our calculators work.