Concrete Cost Calculator

Delivered ready-mix concrete costs about $155 per cubic yard delivered (our calculator's national average), with turnkey slab installation averaging $7.50 to $11.50 per square foot for a standard 4-inch pour in 2026. Total project cost depends primarily on slab thickness, subbase prep, and site access for the ready-mix truck.

Free · No sign-up · Last reviewed

Quick start:

Your project size

(feet)
feet
(feet)
feet
(inches)
inches

Total Ready-Mix Concrete Order

8.00 Cubic Yards (600 sq ft @ 4")

Delivered Ready-Mix Batch Volume

216 cu ft (32,400 lbs @ 4,000 PSI)

Want a real price for this concrete co t calculator project?

Get up to 3 free quotes from local contractors. No obligation. Your numbers are included.

Materials list

MaterialQuantityUnitNotes
4,000 PSI Ready-Mix Air-Entrained Concrete8.00Cubic YardsBatch plant delivery with 8% subgrade variance (ACI 302.1R)
#4 (1/2") Grade 60 Deformed Rebar Sticks3320-Ft Sticks18" on-center grid suspended 2" off subbase on dobies
10-Mil Polyethylene Vapor Retarder11,000 Sq Ft RollsASTM E1745 Class A underslab vapor barrier
2×4 Spruce-Pine-Fir Formwork Lumber912-Ft BoardsPerimeter forms with 2×4 bracing stakes every 3 feet

Estimated cost: DIY vs. contractor

National Average
DIY Raw Materials Only
$1,944 – $2,294

Cost of raw lumber, concrete, shingles, wire, or stone without equipment rentals or labor.

Hired contractor
$4,500 – $6,900

Full installation: permits, site prep, skilled trade labor, equipment, and structural warranty.

Estimated Sweat Equity
~$3,581

Average trade labor savings if executed as a skilled DIY homeowner project.

ACI 302.1R Concrete Volume & Delivered Batching Model

Rendering formula...

Ready-Mix Batching Derivation for 30' × 20' (4" Thick)

  1. Square Footage = 30 ft × 20 ft = 600 sq ft.
  2. Cubic Volume = (600 sq ft × (4 / 12 ft)) / 27 = 7.41 cubic yards.
  3. Applying 8% subgrade tolerance: 7.41 × 1.08 = 8.00 cu yd (rounded to nearest 0.25 yd truck batch).
  4. Order exceeds 4 cu yd minimum: standard full dispatch applies.
Tip: Verify concrete pumper truck clearance in National Average before pouring if truck cannot back directly to slab edge.

Quick Reference Sizing & Coverage Table

Standard commercial specifications and pre-calculated project benchmarks.

Slab DimensionSquare FootageCubic Yards (4")Cubic Yards (6")Turnkey Contractor Cost
10 × 10 ft100 sq ft1.35 cu yd2.00 cu yd$850 – $1,450
12 × 16 ft192 sq ft2.60 cu yd3.85 cu yd$1,600 – $2,600
20 × 20 ft400 sq ft5.45 cu yd8.00 cu yd$3,200 – $5,400
24 × 24 ft576 sq ft7.80 cu yd11.50 cu yd$4,600 – $7,800
30 × 40 ft1,200 sq ft16.25 cu yd24.00 cu yd$9,600 – $15,800
ACI 302.1R Guide for Concrete Floor and Slab Construction

American Concrete Institute (ACI) 302.1R Specifications

Specifies minimum 4,000 PSI compressive strength mix with 4-inch to 5-inch slump for exterior flatwork and garage floors. Requires vapor retarder (ASTM E1745 Class A) and control joint contraction cuts spaced at a maximum interval of 24 to 30 times slab thickness in inches.

How to use the concrete cost calculator

  1. Enter your slab length and width in feet to establish total surface area.
  2. Select your slab thickness (4 inches for walkways and patios, 5 to 6 inches for driveways and garages) and subbase type.
  3. Pick direct truck chute access, buggy, or pumper truck to see your total ready-mix yardage, rebar schedule, and estimated DIY versus pro installation cost.

How much is a yard of concrete?

Our calculator prices standard 4,000 psi ready-mix at $155 per cubic yard, rounds orders up to the next quarter yard, and adds a $150 short-load fee under 4 cubic yards. That fee is why small pours cost more per yard. Prices by mix strength, delivery charges and the bags-versus-truck break-even are covered on our concrete cost per yard page.

Order QuantityReady-Mix MaterialShort-Load Dispatch FeeTotal Delivered CostEffective Price per Yard
1.25 cu yd (10×10 patio, 4″)$194$150$344$275.20 / cu yd
2.00 cu yd (12×12 pad, 4″)$310$150$460$230.00 / cu yd
5.25 cu yd (20×20 garage, 4″)$814$0$814$155.00 / cu yd
7.75 cu yd (24×24 slab, 4″)$1,201$0$1,201$155.00 / cu yd
9.50 cu yd (24×24 shop, 5″)$1,473$0$1,473$155.00 / cu yd
12.00 cu yd (30×30 slab, 4″)$1,860$0$1,860$155.00 / cu yd

How much does a concrete slab cost per square foot?

Installing a residential concrete slab costs $7.50 to $11.50 per square foot turnkey for a standard 4-inch pour with direct chute access. Thicker slabs require additional ready-mix volume, bringing a 5-inch slab to $8.02 to $12.17 per square foot and a 6-inch structural slab to $8.53 to $12.84 per square foot installed based on our pricing engine's thickness scaling.

Square-foot pricing reflects three project phases: subgrade preparation, reinforcing and forming materials, and finishing labor. Subbase grading and compacting crushed aggregate provides a stable base that prevents settling. Forming boards, edge stakes, vapor retarders, and steel reinforcement (#4 Grade 60 rebar) maintain slab geometry and control tensile crack development.

Placement access also alters labor expense. When ready-mix trucks can discharge directly from the chute into the formwork, labor remains at the baseline rate. When fences or terrain block direct chute reach, moving wet mix with a motorized buggy adds 18% to installation costs, while long-distance pumping via a boom or line pump adds 35% (our engine's access multipliers).

Slab ThicknessTypical ApplicationReady-Mix Volume (per 100 sq ft)DIY Materials (per sq ft)Turnkey Installed (per sq ft)
4 inchesPatios, walkways, shed pads1.25 cu yd$3.47 – $4.11$7.50 – $11.50
5 inchesResidential garage floors, standard driveways1.69 cu yd$4.05 – $4.78$8.02 – $12.17
6 inchesHeavy RV parking pads, workshop machinery slabs2.00 cu yd$4.54 – $5.35$8.53 – $12.84

(DIY materials per sq ft derived from 400 sq ft pour without short-load fees; installed costs reflect engine pricing with volume-based thickness scaling).

How many yards of concrete do I need?

To find cubic yards of concrete, multiply slab length by width in feet, multiply by thickness in feet (inches divided by 12), and divide total cubic feet by 27. A 20×20-foot slab poured 4 inches thick measures 400 square feet, which equals 4.94 cubic yards net. After factoring in an 8% subgrade and form tolerance, order 5.25 cubic yards from the ready-mix plant.

Placing an exact volume order risks running short before finishing the slab. Subgrade variations, form deflection, and drum cling consume volume, making an 8% subgrade buffer standard practice. Professional placers add 5% to 10% contingency, rounding up to the nearest quarter-yard batch.

Here is the exact step-by-step mathematical derivation for a 20×20 slab at 4 inches thickness:

  1. Calculate surface area: 20 ft × 20 ft = 400 sq ft.
  2. Convert thickness to feet: 4 inches ÷ 12 inches/ft = 0.333 ft.
  3. Determine cubic feet: 400 sq ft × 0.333 ft = 133.33 cu ft.
  4. Convert to nominal cubic yards: 133.33 cu ft ÷ 27 cu ft/yd³ = 4.94 cu yd.
  5. Apply subgrade contingency (8%): 4.94 × 1.08 = 5.33 cu yd, rounded to the nearest batch plant ticket increment of 0.25 yard = 5.25 cubic yards.

For complex slabs with grade beams or thickened footings, model the slab and the thickened edge together in our monolithic slab calculator.

Concrete slab cost by size

Concrete slab costs scale with square footage, ranging from $750 to $1,150 for a small 10×10 patio up to $6,750 to $10,350 for a 30×30 shop slab installed by a concrete finisher. DIY material costs vary by size: on small slabs (10×10 or 12×12 ft), the $150 short-load fee keeps DIY material costs close to turnkey professional pricing. Once slab volume exceeds 4 cubic yards (such as 20×20 ft or larger), DIY builders save more than half (roughly 55% to 65% depending on slab size and access) compared to turnkey installed pricing.

DIY packages include delivered ready-mix, #4 Grade 60 rebar, 10-mil ASTM E1745 vapor retarder, and 2×4 formwork. Contractor pricing covers turnkey installation: excavation, base preparation, steel placement, pouring, joint tooling, and finishing.

The following costs reflect national averages generated by our pricing engine with direct chute access:

Slab Size (Dimensions)Area (sq ft)Concrete Volume (Ordered)DIY Material CostTurnkey Installed CostTypical Use
10×10 ft (4″ thick)100 sq ft1.25 cu yd$697 – $822$750 – $1,150Small backyard patio, trash pad, AC unit pad
12×12 ft (4″ thick)144 sq ft2.00 cu yd$839 – $990$1,080 – $1,656Hot tub pad, detached storage shed base
20×20 ft (4″ thick)400 sq ft5.25 cu yd$1,388 – $1,638$3,000 – $4,6002-car attached garage floor, large patio
24×24 ft (4″ thick)576 sq ft7.75 cu yd$1,892 – $2,233$4,320 – $6,624Detached 2-car garage or detached workshop
24×24 ft (5″ thick)576 sq ft9.50 cu yd$2,164 – $2,554$4,618 – $7,011Detached 2-car garage with light truck parking
30×30 ft (4″ thick)900 sq ft12.00 cu yd$2,785 – $3,286$6,750 – $10,350Agricultural pole barn, 3-car shop

(Calculated with this tool using national averages with gravel subbase and direct chute access).

What raises or lowers concrete cost

Five jobsite variables drive the spread between baseline pricing and your final concrete invoice: ground preparation, structural reinforcement type, placement access, surface finish, and regional frost depths.

  • Subgrade excavation and aggregate base: Native topsoil and organic material must be stripped prior to forming. Installing and mechanically compacting a 4-inch layer of crushed aggregate provides uniform drainage and load distribution to prevent cracking.
  • Steel reinforcement specification: Light slabs subject only to foot traffic often use welded wire reinforcement for crack control. Slabs supporting vehicles or concentrated machinery require a tied grid of #4 (1/2-inch) deformed steel rebar supported on concrete dobies to handle tensile stresses.
  • Placement access methods: Direct chute discharge from the mixer drum straight into the form is the most affordable option. Where fences, landscaping, or tight property lines prevent direct truck access, transporting mix by motorized buggy adds 18% in placement labor, while pumping concrete over obstacles adds 35% in specialized equipment and labor.
  • Surface texturing and decorative treatments: Standard light broom finishes resist slips at no extra cost. Hard smooth power-troweled finishes for interior garage or shop floors require multiple passes as the concrete cures. Decorative stamped patterns or acid staining substantially increase labor and material requirements.
  • Local frost depths and code requirements: Regions with deep frost lines require perimeter turn-down footings below local frost depth, increasing ready-mix volume, excavation, and rebar compared to simple slab-on-grade pours.

Frequently asked questions

Is it cheaper to mix concrete yourself?

Mixing bagged concrete by hand or in a portable barrel mixer is only economical for small pours under 1 cubic yard (about 45 80-lb bags). Beyond that volume, the physical labor of hauling, slitting, and mixing becomes prohibitive. At standard bag prices ($7.20 per 80-lb bag in our bag calculator), 1 cubic yard requires 45 bags costing $324 in dry mix alone (derived). Delivered ready-mix costs about $155 per cubic yard, making ready-mix significantly cheaper once your project clears short-load thresholds.

What is a short-load fee?

Ready-mix suppliers dispatch concrete in commercial trucks holding 9 to 11 cubic yards. When an order is under 4 cubic yards, suppliers levy a short-load dispatch fee (our engine uses the national standard of $150). This surcharge compensates the batch plant and driver for operating a heavy commercial transit vehicle with unused drum capacity.

How much does a 24×24 garage slab cost?

A 24×24 garage slab (576 square feet) poured 4 inches thick costs $4,320 to $6,624 installed turnkey, requiring 7.75 cubic yards of ready-mix. For heavier vehicle parking or workshops requiring a 5-inch slab, turnkey installation costs $4,618 to $7,011 (requiring 9.50 cubic yards of ready-mix), while DIY materials run $2,164 to $2,554. Check our dedicated garage slab cost calculator for detailed edge footing estimates.

Does price include gravel base?

Standard square-foot concrete quotes from finishing contractors typically cover forming, placing, and finishing the concrete slab itself. Excavating native soil and supplying, grading, and compacting a 4-inch crushed aggregate subbase (such as #57 stone or crusher run) is frequently billed as a separate site-prep item. A properly compacted aggregate subbase is critical to provide drainage and prevent frost heave.

Sources and review

Prices and quantities come from the calculator above. Last reviewed . How our calculators work.