Mini Split BTU Calculator by Room Size

Find the mini split or air conditioner size a room needs from its square footage, sun, occupants and use, based on the ENERGY STAR room sizing chart.

Free · No sign-up · Last reviewed

Quick start:

Your project size

(ft)
ft
(ft)
ft
(people)
people

Recommended Mini Split Size

9,000 BTU (0.75 Ton) Cooling need: 9,000 BTU/hr

Room Size & Adjustments

360 sq ft → 9,000 BTU base | 0.75 tons

Want a real price for this mini split btu calculator by room size project?

Get up to 3 free quotes from local contractors. No obligation. Your numbers are included.

Materials list

MaterialQuantityUnitNotes
Mini Split Outdoor Unit (9,000 BTU (0.75 Ton))1UnitInverter heat pump condenser
Wall-Mounted Indoor Head1HeadMatched to the outdoor unit
Insulated Copper Line Set25FeetLength depends on where the units go
Communication / Power Wire35FeetBetween outdoor and indoor units
Condensate Drain Line & Wall Sleeve1KitSloped to drain outside

Estimated cost: DIY vs. contractor

National Average
DIY Raw Materials Only
$1,730 – $2,390

Cost of raw lumber, concrete, shingles, wire, or stone without equipment rentals or labor.

Hired contractor
$3,720 – $5,580

Full installation: permits, site prep, skilled trade labor, equipment, and structural warranty.

Estimated Sweat Equity
~$2,590

Average trade labor savings if executed as a skilled DIY homeowner project.

ENERGY STAR Room Sizing Chart + Adjustments

Rendering formula...

Sizing a 20' × 18' Room

  1. Room area = 20 × 18 = 360 sq ft → 9,000 BTU from the ENERGY STAR sizing chart.
  2. Sun adjustment (none) = 9,000 BTU.
  3. People: 2 regularly in the room (no adjustment for 2 or fewer).
  4. Not a kitchen: no kitchen adjustment.
  5. Cooling need = 9,000 BTU → 9,000 BTU (0.75 Ton).
Tip: This sizes one room. For a whole house, or a room with unusual windows or ceilings, ask the installer for a load calculation.

Quick Reference Sizing & Coverage Table

Standard commercial specifications and pre-calculated project benchmarks.

Room AreaENERGY STAR Chart BTUVery Sunny (+10%)Smallest Mini Split That Covers ItExample Room
150 – 250 sq ft6,0006,6009,000 BTUBedroom or office
300 – 350 sq ft8,0008,8009,000 BTULarge bedroom
450 – 550 sq ft12,00013,20012,000 / 18,000 BTULiving room
700 – 1,000 sq ft18,00019,80018,000 / 24,000 BTUOpen-plan area
1,500 – 2,000 sq ft30,00033,00030,000 / 36,000 BTULarge open floor
ENERGY STAR room air conditioner sizing chart

Room Sizing vs. a Load Calculation

The chart sizes a single room by floor area, with adjustments for sun, people and kitchens. Rooms with very high ceilings, large windows or poor insulation, and whole-house systems, need a proper load calculation (ACCA Manual J) from the installer.

Frequently Asked Questions

What size mini split do I need for a 500 sq ft room?

The ENERGY STAR chart puts 450 to 550 sq ft at 12,000 BTU. A very sunny room needs about 10% more, so a 12,000 BTU unit is borderline and an 18,000 BTU unit covers it.

Can a mini split be too big for a room?

Yes. An oversized unit cools the room quickly and shuts off before it removes much humidity, leaving the room cold and clammy. Pick the smallest size that covers the room's need.

How many BTU do I need per square foot?

There's no single figure: the ENERGY STAR chart runs from about 5,000 BTU for 100 to 150 sq ft to 34,000 BTU for 2,000 to 2,500 sq ft, so larger rooms need fewer BTU per square foot.

Does a kitchen need a bigger air conditioner?

Yes. ENERGY STAR adds 4,000 BTU for a unit used in a kitchen, because cooking adds heat.