EV Charger Installation Cost (Level 2) by Distance
Need Exact Math for Your Project?
Launch our free online tool: EV Charger Wire Size Calculator
EV Charger Installation Cost (Level 2) by Distance — Assembly Anatomy
Interactive 3D Isometric Engineering Rig • Verified Model
Running a circuit for a 48-amp Level 2 charger 50 ft from your electrical panel costs about $1,025 to $1,575 installed in our calculator, not counting the charger itself. A short 20 ft run costs about $740–$1,140, and a 100 ft run to a detached garage about $1,500–$2,300. Distance, wire size and whether your panel has room for a new 240-volt breaker drive the price.
TL;DR
- Installed circuit cost: about $740–$1,140 at 20 ft, $1,025–$1,575 at 50 ft, $1,500–$2,300 at 100 ft.
- 48-amp charger: 60-amp breaker, 6 AWG copper for typical runs, 4 AWG on long runs.
- 32-amp charger: 8 AWG copper on a 50-amp breaker in our calculator.
- The charger itself is extra, and so is any panel upgrade.
- Permits: most areas require one for a new 240-volt circuit.
Check your own run with the EV charger wire size calculator.
Installation cost by distance
| Charger | Distance from panel | Wire (copper) | Breaker | Installed circuit cost |
|---|---|---|---|---|
| 32 A | 20 ft | 8 AWG | 50 A | $740 – $1,140 |
| 32 A | 50 ft | 8 AWG | 50 A | $1,025 – $1,575 |
| 48 A | 20 ft | 6 AWG | 60 A | $740 – $1,140 |
| 48 A | 50 ft | 6 AWG | 60 A | $1,025 – $1,575 |
| 48 A | 100 ft | 4 AWG | 60 A | $1,500 – $2,300 |
In our calculator the price is driven mainly by run length, which is why 32-amp and 48-amp circuits cost about the same at the same distance. If you do the wiring yourself where that's allowed, materials for a 48-amp circuit at 50 ft run about $372–$555.
Why the breaker is bigger than the charger
An EV charges for hours at a time, so the circuit is treated as a continuous load and sized at 125% of the charger's current. A 48-amp charger needs a 60-amp circuit (48 × 1.25); a 32-amp charger needs at least 40 amps (32 × 1.25). Our calculator puts a 32-amp charger on a 50-amp breaker with 8 AWG copper, a common setup that also suits a NEMA 14-50 outlet.
Wire size and distance
Longer runs lose more voltage, so the calculator steps up the wire on long runs: a 48-amp charger 100 ft away goes to 4 AWG copper, keeping the voltage drop at 1.24%. A 32-amp circuit at 100 ft on 8 AWG has a 2.08% drop. Both are inside the common 3% design target. Aluminum wire is cheaper but needs a larger size; the calculator handles both.
What else changes the price
- Panel space and capacity. If your panel has no room for a 240-volt breaker, or the house's service is too small for the extra load, you may need a subpanel or a service upgrade, which can cost more than the circuit. Our subpanel wire size calculator helps if you're adding one.
- The route. Running wire through a finished basement or across a garage ceiling is quicker than fishing it through finished walls or trenching to a detached garage.
- Hardwired charger vs. outlet. Some chargers plug into a 240-volt outlet; others are wired directly. The charger's manual says which, and what circuit it needs.
- Permit and inspection fees, which vary by town.
- Utility rebates. Some utilities offer rebates or special charging rates; check with yours before you buy.
FAQ
How much does it cost to install a Level 2 charger?
For the circuit, about $740–$1,140 for a short 20 ft run and about $1,025–$1,575 at 50 ft in our calculator, plus the charger itself and any panel work.
What size breaker do I need for a 48-amp EV charger?
A 60-amp breaker, because the circuit is sized at 125% of the charger's 48 amps. Our calculator pairs it with 6 AWG copper on typical runs and 4 AWG on long ones.
Can I install an EV charger myself?
A new 240-volt circuit usually needs a permit, and many areas require a licensed electrician. Even where DIY is allowed, have the work inspected.
Do I need a panel upgrade for an EV charger?
Not always. An electrician can do a load calculation to see whether your existing service can handle the charger. If it can't, a load-management device or a lower charger setting may avoid an upgrade.
Sources
- SpanSizer EV charger wire size calculator (wire, breaker, voltage drop and cost figures)
- IAEI Magazine – Voltage Drop Formulas (voltage drop method)
Rather hire it out? Compare local electrical quotes
Tell us about your project and we'll share it with up to 3 contractors who serve your ZIP code. Always ask for proof of license and insurance before you hire.
Quantities come from the same formulas as our calculators, and prices come from the sources listed in each guide. Read how SpanSizer works.