HVAC & Plumbing6 min read

What Size AC Unit Do I Need? BTU by Room and House Size

By SpanSizer Editorial Team
• Updated

Need Exact Math for Your Project?

Launch our free online tool: Mini Split BTU Calculator

Open Calculator

What Size AC Unit Do I Need — Assembly Anatomy

Interactive 3D Isometric Engineering Rig • Verified Model

Interactive Model
Interactive Spec Explorer:
sand = 1" (ICPI OK)
60mm Interlocking Pavers & Polymeric Joints1" ASTM C33 Washed Concrete Sand Bed (1")6" Compacted #57 Stone BaseASTM D4632 Geotextile Stabilization FabricEngineered interlocking paver assembly adhering to ICPI Tech Spec 2. Illustrates depth-ordered cross-section: compacted crushed aggregate sub-base, non-woven separation fabric, exactly 1 inch of uncompacted ASTM C33 washed concrete sand, interlocking concrete pavers, and spiked commercial edge restraint.

For a single room, use the ENERGY STAR sizing chart: about 6,000 BTU for 150–250 sq ft, 12,000 BTU for 450–550 sq ft and 18,000 BTU for 700–1,000 sq ft, adjusted for sun, people and kitchens. For a whole house, a common rule of thumb is 20 to 30 BTU per square foot, but the size you actually buy should come from a load calculation (ACCA Manual J) done by the installer.

Executive Summary & Field Takeaway

TL;DR

- One room: use the ENERGY STAR chart by floor area, then adjust.

- Sunny room: add 10%. Heavily shaded: subtract 10%.

- More than two people: add 600 BTU per extra person. Kitchen: add 4,000 BTU.

- Whole house: 20–30 BTU per sq ft as a rough guide; 12,000 BTU = 1 ton.

- Don't oversize: a unit that's too big cools fast but leaves the air damp.

Size one room with our mini split BTU calculator, or a whole house with the heat pump size calculator.

AC size for one room

ENERGY STAR's chart for room air conditioners:

Room areaBTU per hour
100 – 150 sq ft5,000
150 – 250 sq ft6,000
250 – 300 sq ft7,000
300 – 350 sq ft8,000
350 – 400 sq ft9,000
400 – 450 sq ft10,000
450 – 550 sq ft12,000
550 – 700 sq ft14,000
700 – 1,000 sq ft18,000
1,000 – 1,200 sq ft21,000
1,200 – 1,400 sq ft23,000
1,400 – 1,500 sq ft24,000
1,500 – 2,000 sq ft30,000
2,000 – 2,500 sq ft34,000

Then adjust:

  • Heavily shaded room: reduce by 10%.
  • Very sunny room: increase by 10%.
  • More than two people regularly in the room: add 600 BTU for each extra person.
  • Kitchen: add 4,000 BTU.

Worked examples

RoomChartAdjustmentsNeedMini split size
16 × 14 ft bedroom6,000none6,000 BTU9,000 BTU (smallest common size)
24 × 20 ft sunny living room, 4 people12,000+10% sun, +1,200 people14,400 BTU18,000 BTU
16 × 12 ft kitchen6,000+4,000 kitchen10,000 BTU12,000 BTU

Mini splits come in fixed sizes, often starting at 9,000 BTU, so a small room may end up with a unit a little bigger than it needs. Many models adjust their output to the load, which helps.

AC size for a whole house

Whole-house systems are sized in tons: one ton is 12,000 BTU per hour. A common rule of thumb is 20 to 30 BTU per square foot, toward the upper end in hotter climates and in homes with lots of sun or poor insulation. By that rule, a 2,000 sq ft house would land somewhere between 40,000 and 60,000 BTU, or about 3.3 to 5 tons (derived).

That range is wide on purpose. Rules of thumb can't see your windows, insulation, air leaks, ceiling heights or local design temperatures. ACCA Manual J is the standard load calculation that does, and it often comes out smaller than the rule of thumb. Ask every installer to show you their load calculation before you agree on a size.

Why bigger isn't better

An oversized air conditioner cools the room quickly and shuts off before it has run long enough to remove much moisture. The result is a room that feels cold and clammy, more on-off cycling, and more wear on the equipment. A correctly sized unit runs longer, steadier cycles and dehumidifies as it cools.

FAQ

How many BTU do I need for a 12×12 room?

A 12 × 12 ft room is 144 sq ft, which falls in the ENERGY STAR 100–150 sq ft row: about 5,000 BTU, before adjustments.

What size AC for 500 square feet?

500 sq ft falls in the 450–550 sq ft row: 12,000 BTU. A very sunny room needs about 10% more, 13,200 BTU, which pushes a mini split up to the next size, 18,000 BTU.

How many square feet does 1 ton of AC cool?

One ton is 12,000 BTU. On the ENERGY STAR chart that covers a single room of about 450–550 sq ft; for whole houses, the rule of thumb is roughly 400–600 sq ft per ton (derived from 20–30 BTU per sq ft), but a load calculation decides.

Is a heat pump sized the same way?

For cooling, yes. In cold climates, a heat pump also has to meet the heating load, which can call for a different size or a cold-climate model. See our heat pump size calculator.

Sources

Free · No obligation

Rather hire it out? Compare local HVAC quotes

Tell us about your project and we'll share it with up to 3 contractors who serve your ZIP code. Always ask for proof of license and insurance before you hire.

Up to 3 local quotesFree for homeownersNo obligation to hire
How we build these guides

Quantities come from the same formulas as our calculators, and prices come from the sources listed in each guide. Read how SpanSizer works.