Landscaping & Earth6 min read

French Drain Cost: Price per Foot, DIY vs. Pro (2026)

By SpanSizer Editorial Team
• Updated
French Drain Cost: Price per Foot, DIY vs. Pro (2026) — Technical Cross-Section & Installation Guide
Technical Specification DiagramEngineered Trade Standards (ICPI / ASTM / ACI)

Need Exact Math for Your Project?

Launch our free online tool: French Drain Calculator

Open Calculator

French Drain Cost — Assembly Anatomy

Interactive 3D Isometric Engineering Rig • Verified Model

Interactive Model
Interactive Spec Explorer:
Bedding Depth:Patio Area:
sand = 1" (ICPI OK)
60mm Interlocking Pavers & Polymeric Joints1" ASTM C33 Washed Concrete Sand Bed (1")6" Compacted #57 Stone BaseASTM D4632 Geotextile Stabilization FabricEngineered interlocking paver assembly adhering to ICPI Tech Spec 2. Illustrates depth-ordered cross-section: compacted crushed aggregate sub-base, non-woven separation fabric, exactly 1 inch of uncompacted ASTM C33 washed concrete sand, interlocking concrete pavers, and spiked commercial edge restraint.

A French drain costs about $32 to $48 per linear foot installed in our calculator, so a 50 ft drain along a foundation runs about $1,600 to $2,400. If you dig it yourself, the stone, pipe and fabric for that drain cost about $485 to $587. The rest of the professional price is digging, which is the hard part.

Executive Summary & Field Takeaway

TL;DR

- Installed: about $32–$48 per foot of drain.

- DIY materials: about $10–$12 per foot for a 12-inch-wide, 2 ft deep trench with 4-inch pipe.

- 50 ft foundation drain: 5.9 tons of #57 stone, 300 sq ft of fabric, 50 ft of perforated pipe.

- Slope: our calculator uses 1/8 inch of fall per foot, so a 50 ft run drops about 6.3 inches.

- Outlet: the drain has to empty somewhere lower, to daylight, a dry well or a storm drain where allowed.

Use the French drain calculator for your own trench length, width and depth.

French drain cost by size

DrainTrenchPipeStoneInstalledDIY materials
Foundation drain, 50 ft12" wide × 24" deep4"5.9 tons$1,600 – $2,400$485 – $587
Yard drain, 80 ft12" × 16"4"6.2 tons$2,560 – $3,840$583 – $705
Driveway interceptor, 100 ft18" × 20"6"14.2 tons$3,200 – $4,800$1,064 – $1,288

Per foot, all three come out at $32–$48 installed (derived: $1,600 ÷ 50 ft and $2,400 ÷ 50 ft). DIY materials run about $10–$12 per foot for the 50 ft drain (derived: $485 ÷ 50 and $587 ÷ 50); a wider, deeper trench takes more stone.

What a French drain is made of

  1. A trench sloped toward the outlet.
  2. Filter fabric lining the trench, so soil doesn't clog the stone.
  3. Clean washed stone, usually #57, around the pipe.
  4. A perforated pipe at the bottom that carries the water away.
  5. An outlet at the low end: daylight on a slope, a dry well, or a connection your town allows.

Our calculator subtracts the space the pipe takes up from the trench volume before working out the stone, and lists the fabric needed to wrap the trench.

How deep and how sloped?

Depth depends on the job. A drain catching surface water across a yard can be fairly shallow, while one protecting a foundation goes deeper. The slope matters as much as the depth: our calculator uses 1/8 inch of fall per foot, which means a 100 ft drain needs about 12.5 inches of drop from end to end. If your yard doesn't have that much natural fall, the trench gets deeper toward the outlet.

Call 811 before you dig. It's free, and utility lines often run exactly where a drain would go.

DIY or hire a pro?

The materials are cheap; the trench is the work. A 50 ft trench 2 ft deep means moving several cubic yards of soil by hand, or renting a trencher or mini excavator. Hiring a pro makes sense when:

  • the drain runs next to a foundation, where digging too close or too deep can cause problems,
  • the soil is heavy clay or full of roots and rocks,
  • the water problem is in a basement, which may need an interior drain and a sump pump instead.

French drain vs. dry creek bed

A dry creek bed is a shallow, rock-lined channel that carries surface water across the yard in the open. It's cheaper and easier to build and can look like a landscape feature, but it only handles water flowing on the surface. A French drain is buried and collects water that soaks into the ground. If water pools on top of the lawn after rain, a creek bed or swale may be enough; if the ground stays soggy or water reaches the foundation, a French drain is the better fix.

FAQ

How long should a French drain last?

It depends mostly on whether silt gets into the stone and pipe. Fabric around the stone and a clear outlet help it keep working; a drain without fabric in fine soil can clog over time.

Do I need fabric for a French drain?

Fabric keeps soil out of the stone, so the drain keeps flowing. Our calculator includes enough to line the trench.

Can a French drain go next to the house?

Yes, it's a common way to keep water away from a foundation. Keep the outlet well away from the house, and if the problem is water inside the basement, ask a waterproofing contractor whether an interior drain is needed.

What size pipe should I use?

Most yard and foundation drains use 4-inch perforated pipe. Larger drains that collect water from a driveway or a big area may use 6-inch pipe, as in the 100 ft example above.

Sources

  • SpanSizer French drain calculator (quantities and prices on this page)
Free · No obligation

Rather hire it out? Compare local landscaping quotes

Tell us about your project and we'll share it with up to 3 contractors who serve your ZIP code. Always ask for proof of license and insurance before you hire.

Up to 3 local quotesFree for homeownersNo obligation to hire
How we build these guides

Quantities come from the same formulas as our calculators, and prices come from the sources listed in each guide. Read how SpanSizer works.